Zilog Z80

Zilog Z80

One of the first Z80 microprocessors manufactured; the date stamp is from June 1976.
Produced 1976
Common manufacturer(s)

The Zilog Z80 is an 8-bit microprocessor designed by Zilog and sold from July 1976 onwards. It was widely used both in desktop and embedded computer designs as well as for military purposes. The Z80 and its derivatives and clones make up one of the most commonly used CPU families of all time, and, along with the MOS Technology 6502 family, dominated the 8-bit microcomputer market from the late 1970s to the mid-1980s.

Zilog licensed the Z80 design to several vendors, though many East European and Russian manufacturers made unlicensed copies. This enabled a small company's product to gain acceptance in the world market since second sources from far larger companies such as Toshiba started to manufacture the device. Consequently, Zilog has made less than 50% of the Z80s since its conception. In recent decades Zilog has refocused on the ever-growing market for embedded systems (for which the original Z80 and the Z180 were designed) and the most recent Z80-compatible microcontroller family, the fully pipelined 24-bit eZ80 with a linear 16 MB address range, has been successfully introduced alongside the simpler Z180 and Z80 products.

Although Zilog made early attempts with advanced mini-computer-like versions of the Z80-architecture (Z800 and Z280), these chips never caught on. The company was also trying hard in the workstation market with its Z8000 and 32-bit Z80000, both unrelated to the 8-bit Z80.

Contents

Brief history and overview

The Z80 came about when Federico Faggin, after working on the 8080, left Intel at the end of 1974 to found Zilog with Ralph Ungermann, and by July 1976 they had the Z80 on the market.[1] It was designed to be binary compatible with the Intel 8080[2][3] so that most 8080 code, notably the CP/M operating system, would run unmodified on it. Masatoshi Shima, co-designer of the 4004 and the 8080, also contributed to the development of the Z80.[4][5]

The Z80 offered many real improvements over the 8080:[3]

The Z80 took over from the 8080 and its offspring, the 8085, in the processor market,[9] and became one of the most popular 8-bit CPUs.[10][11] Perhaps a key to the initial success of the Z80 was the built-in DRAM refresh, and other features which allowed systems to be built with fewer support chips (later on, most Z80 systems have been embedded systems, which typically uses static RAM and hence does not need this refresh).

For the original NMOS design, the specified upper clock frequency limit increased successively from the introductory 2.5 MHz, via the well known 4 MHz (Z80A), up to 6 (Z80B) and 8 MHz (Z80H).[12][13] A CMOS version was also developed with specified frequency limits ranging from 4 MHz up to 20 MHz for the version sold today. The CMOS version also allowed a low-power sleep with internal state retained (having no lower frequency limit). The fully compatible derivatives HD64180/Z180[14][15] and eZ80 are currently specified for up to 33 and 50 MHz respectively.

Technical description

Programming model and register set

The programming model and register set are conventional and similar to the related x86 family. The 8080 compatible registers AF, BC, DE, HL are duplicated as two separate banks in the Z80,[16] where the processor can quickly switch from one bank to the other;[17] a feature useful for speeding up responses to single-level, high-priority interrupts. This feature was present in the Datapoint 2200 but was not implemented by Intel in the 8008. The dual-register set makes sense as the Z80 (like most microprocessors at the time) was really intended for embedded use, not for personal computers, or the yet-to-be invented home computers. According to one of the designers, Masatoshi Shima, the market focus was on high performance printers, high-end cash registers, and intelligent terminals. It also turned out to be quite useful for heavily optimized manual assembly coding. Some software, especially games for the MSX, Sinclair ZX Spectrum and other Z80 based computers took Z80 assembly optimization to rather extreme levels, employing the duplicated registers among other things.

Registers
[18]

Like on the 8080, 8-bit registers are typically coupled to provide 16-bit versions. The 8080 compatible registers are:

The new registers introduced with the Z80 are:

There is no direct access to the alternate registers; instead, two special instructions, EX AF,AF' and EXX,[18] each toggles one of two multiplexer flip-flops; this enables fast context switches for interrupt service routines: EX AF, AF' may be used alone (for really simple and fast interrupt routines) or together with EXX to swap the whole AF, BC, DE, HL set; still much faster than pushing the same registers on the stack (slower, lower priority, or multi level interrupts normally use the stack to store registers).

The refresh register, R, increments each time the CPU fetches an opcode (or opcode prefix) and has therefore no simple relationship with program execution. This has sometimes been used to generate pseudorandom numbers in games, and also in software protection schemes. It has also been employed as a "hardware" counter in some designs; a famous example of this is the ZX81, which lets it keep track of character positions on the TV screen by triggering an interrupt at wrap around (by connecting INT to A6).

The interrupt vector register, I, is used for the Z80 specific mode 2 interrupts (selected by the IM 2 instruction). It supplies the high byte of the base address for a 128-entry table of service routine addresses which are selected via a pointer sent to the CPU during an interrupt acknowledge cycle; the low byte of the base address is fixed at zero.[8] The pointer identifies a particular peripheral chip and/or peripheral function or event, where the chips are normally connected in a so called daisy chain for priority resolution. Like the refresh register, this register has also sometimes been used creatively; in interrupt modes 0 and 1 it can be used as simply another 8-bit data register.

Z80 assembly language

Datapoint 2200 and Intel 8008

The first Intel 8008 assembly language was based on a very simple (but systematic) syntax inherited from the Datapoint 2200 design. This original syntax was later transformed into a new, somewhat more traditional, assembly language form for this same original 8008 chip. At about the same time, the new assembly language was also extended to accommodate the added addressing possibilities in the more advanced Intel 8080 chip (the 8008 and 8080 shared a language subset without being binary compatible; however, the 8008 was binary compatible with the Datapoint 2200).

In this process, the mnemonic L, for LOAD, was replaced by various abbreviations of the words LOAD, STORE and MOVE, intermixed with other symbolic letters. The mnemonic letter M, for memory (referenced by HL), was lifted out from within the instruction mnemonic to become a syntactically freestanding operand, while registers and combinations of registers became very inconsistently denoted; either by abbreviated operands (MVI D, LXI H and so on), within the instruction mnemonic itself (LDA, LHLD and so on), or both at the same time (LDAX B, STAX D and so on).

Datapoint 2200 & i8008 i8080 Z80 i8086/i8088
before ~1973 ~1974 1976 1978
LBC MOV B,C LD B,C MOV BL,CL
-- LDAX B LD A,(BC) MOV AL,[BX]
LAM MOV A,M LD A,(HL) MOV AL,[BP]
LBM MOV B,M LD B,(HL) MOV BL,[BP]
-- STAX D LD (DE),A --
LMA MOV M,A LD (HL),A MOV [BP],AL
LMC MOV M,C LD (HL),C MOV [BP],CL
LDI 56 MVI D,56 LD D,56 MOV DL,56
LMI 56 MVI M,56 LD (HL),56 MOV byte ptr [BP],56
-- LDA 1234 LD A,(1234) MOV AL,[1234]
-- STA 1234 LD (1234),A MOV [1234],AL
-- -- LD B,(IX+56) MOV BL,[SI+56]
-- -- LD (IX+56),C MOV [SI+56],CL
-- -- LD (IY+56),78 MOV byte ptr [DI+56],78
-- LXI B,1234 LD BC,1234 MOV BX,1234
-- LXI H,1234 LD HL,1234 MOV BP,1234
-- SHLD 1234 LD (1234),HL MOV [1234],BP
-- LHLD 1234 LD HL,(1234) MOV BP,[1234]
-- -- LD BC,(1234) MOV BX,[1234]
-- -- LD IX,(1234) MOV SI,[1234]

Illustration of four syntaxes, using samples of equivalent, or (for 8086) very similar, load and store instructions.[19]

New syntax

Because Intel had claimed copyright on their assembly mnemonics, a new assembly syntax had to be developed. This time a more systematic approach was used:

These principles made it straightforward to find names and forms for all new Z80 instructions, as well as orthogonalizations of old ones, such as LD BC,(1234).

Apart from naming differences, and despite a certain discrepancy in basic register structure, the Z80 and 8086 syntax are virtually isomorphous for a large portion of instructions. Only quite superficial similarities (such as the word MOV, or the letter X, for extended register) exist between the 8080 and 8086 assembly languages, although 8080 programs can be compiled into x86 code using a special assembler.[21][22]

Instruction set and encoding

The Z80 uses 252 out of the available 256 codes as single byte opcodes ("root instruction"); the four remaining codes are used extensively as opcode prefixes:[23] CB and ED enable extra instructions and DD or FD selects IX+d or IY+d respectively (in some cases without displacement d) in place of HL. This scheme gives the Z80 a large number of permutations of instructions and registers; Zilog categorizes these into 158 different "instruction types", 78 of which are the same as those of the Intel 8080[23] (allowing operation of 8080 programs on a Z80). The Zilog documentation further groups instructions into the following categories:

No multiply instruction is available in the original Z80.[24] Different sizes and variants of additions, shifts, and rotates have somewhat differing effects on flags because the flag-influencing properties of the 8080 were copied. Load instructions do not affect the flags (except for the special purpose I and R register loads). The index register instructions are useful for reducing code size, and, while some of them are not much faster than "equivalent" sequences of simpler operations, they also save execution time indirectly by reducing the need to save and restore registers. The 10-year-newer microcoded Z180 design could initially afford more "chip area", permitting a slightly more efficient implementation (using a wider ALU, among other things), similar things can be said for the Z800, Z280, and Z380. However, it was not until the fully pipelined eZ80 was launched in 2001 that those instructions finally became approximately as cycle-efficient as it is technically possible to make them, i.e. given the Z80 encodings combined with the capability to do an 8-bit read or write every clock cycle. Similarly, instructions for 16-bit additions are not particularly fast (11 clocks) in the original Z80; nonetheless, they are about twice as fast as performing the same calculations using 8-bit operations, and equally important, they reduce register usage.

Undocumented instructions

The index registers, IX and IY, were intended as flexible 16 bit pointers, enhancing the ability to manipulate memory, stack frames and data structures. Officially, they were treated as 16-bit only. In reality, they were implemented as a pair of 8-bit pair registers,[25] in the same fashion as the HL register, which is accessible either as 16 bits or separately as the High and Low registers. Even the binary opcodes (machine language) were identical, but preceded by a new opcode prefix.[26] Zilog published the opcodes and related mnemonics for the intended functions, but did not document the fact that every opcode that allowed manipulation of the H and L registers was equally valid for the 8 bit portions of the IX and IY registers. As an example, the opcode 26h followed by an immediate byte value (LD H,n) will load that value into the H register. Preceding this two-byte instruction with the IX register's opcode prefix DD, would instead result in the most significant 8 bits of the IX register being loaded with that same value. A notable exception to this would be instructions similar to LD H,(IX+d) which make use of both the HL and IX or IY registers in the same instruction;[26] in this case the DD prefix is only applied to the (IX+d) portion of the instruction.

There are several other undocumented instructions as well.[27] Undocumented or illegal opcodes are not detected by the Z80 and have various effects, some of which are useful. However, as they are not part of the formal definition of the instruction set, different implementations of the Z80 are not guaranteed to work the same way for every undocumented opcode.

Instruction execution

Each instruction is executed in steps that are usually termed machine cycles (M-cycles), each of which can take between three and six clock periods (T-cycles).[28] Each M-cycle corresponds roughly to one memory access and/or internal operation. Many instructions actually end during the M1 of the next instruction which is known as a fetch/execute overlap.

Examples of typical instructions (R=read, W=write)
Total

M-cycles

 instruction M1 M2 M3 M4 M5 M6
1[29] INC BC opcode
2[30] ADD A,n opcode n
3[31] ADD HL,DE opcode internal internal
4[32] SET b,(HL) prefix opcode R(HL), set W(HL)
5[33] LD (IX+d),n prefix opcode d n,add W(IX+d)
6[34] INC (IY+d) prefix opcode d add R(IY+d),inc W(IY+d)

The Z80 machine cycles are sequenced by an internal state machine which builds each M-cycle out of 3, 4, 5 or 6 T-cycles depending on context. This avoids cumbersome asynchronous logic and makes the control signals behave consistently at a wide range of clock frequencies. Naturally, it also means that a higher frequency crystal must be used than without this subdivision of machine cycles (approximately 2–3 times higher). It does not imply tighter requirements on memory access times, however, as a high resolution clock allows more precise control of memory timings and memory therefore can be active in parallel with the CPU to a greater extent (i.e. sitting less idle), allowing more efficient use of available memory performance. For instruction execution, the Z80 combines two full clock cycles into a long memory access period (the M1-signal) which would typically last only a fraction of a (longer) clock cycle in a more asynchronous design (such as the 6800, or similar).

Memory, especially EPROM, but also Flash, were generally slow as compared to the state machine sub-cycles (clock cycles) used in contemporary microprocessors. The shortest machine cycle that could safely be used in embedded designs has therefore often been limited by memory access times, not by the maximum CPU frequency (especially so during the home computer era). However, this relation has slowly changed during the last decades, particularly regarding SRAM; cacheless, single-cycle designs such as the eZ80 have therefore become much more meaningful recently.

Compatible peripherals

Zilog introduced a number of peripheral parts for the Z80, which all supported the Z80's interrupt handling system and I/O address space. These included the CTC (Counter-Timer-Circuit), the SIO (Serial Input Output), the DMA (Direct Memory Access), the PIO (Parallel Input-Output) and the DART (Dual Asynchronous Receiver Transmitter). As the product line developed, low-power, high-speed and CMOS versions of these chips were produced.

Like the 8080, 8085 and 8086 processors, but unlike processors such as the Motorola 6800 and MOS Technology 6502, the Z80 and 8080 had a separate control line and address space for I/O instructions. While some Z80-based computers used "Motorola-style" memory mapped input/output devices, usually the I/O space was used to address one of the many Zilog peripheral chips compatible with the Z80. Zilog I/O chips supported the Z80's new mode 2 interrupts which simplified interrupt handling for large numbers of peripherals.

'Undocumented' 16 bit I/O-addressing

The Z80 was officially described as supporting 16-bit (64 KB) memory addressing, and 8-bit (256 ports) I/O-addressing. Looking carefully at the hardware reference manual, it can be seen that all I/O instructions actually assert the entire 16-bit address bus. OUT (C),reg and IN reg,(C) places the contents of the entire 16 bit BC register on the address bus;[35] OUT (n),A and IN A,(n) places the contents of the A register on b8-b15 of the address bus and n on b0-b7 of the address bus. A designer could choose to decode the entire 16 bit address bus on I/O operations in order to take advantage of this feature, or use the high half of the address bus to select subfeatures of the I/O device. This feature has also been used to minimise decoding hardware requirements, such as in the Amstrad CPC and ZX81.

Second sources and derivatives

Second sources

Mostek MK3880 and SGS-Thomson Z8400 (now STMicroelectronics) were both second-sources for the Z80. Sharp and NEC developed second sources for the NMOS Z80, the LH0080 and µPD780C respectively. The µPD780C was used in the Sinclair ZX80 and ZX81, original versions of the ZX Spectrum, and several MSX computers, and in musical synthesizers such as Oberheim OB-8 and others. The LH0080 was used in various home computers and personal computers made by Sharp and other Japanese manufacturers, including Sony MSX computers, and a number of computers in the Sharp MZ series.[36]

Toshiba made a CMOS-version, the TMPZ84C00, which is believed (but not verified) to be the same design also used by Zilog for its own CMOS Z84C00. There were also Z80-chips made by GoldStar (alias LG) and the BU18400 series of Z80-clones (including DMA, PIO, CTC, DART and SIO) in NMOS and CMOS made by ROHM Electronics.

In East Germany, an unlicensed clone of the Z80, known as the U880, was manufactured. It was very popular and was used in Robotron's and VEB Mikroelektronik Mühlhausen's computer systems (e.g. the KC85-series) and also in many self-made computer systems (ex. COMP JU+TER). In Romania another unlicensed clone could be found, named MMN80CPU and produced by Microelectronica, used in home computers like TIM-S, HC, COBRA.

Also, several clones of Z80 were created in the Soviet Union, notable ones being the T34BM1, also called КР1858ВМ1 (parallelling the Russian 8080-clone KR580VM80A) The first marking was used in pre-production series, while the second had to be used for a larger production. Though, due to the collapse of Soviet microelectronics in late 80s, there are many more T34BM1s than КР1858ВМ1s.

Derivatives

Compatible with the original Z80
Non-compatible
Partly compatible
No longer produced

FPGA and ASIC versions

A commercial, functionally equivalent, CPU core is the Evatronix CZ80CPU,[45] available as synthesizable VHDL or Verilog source code, for high-volume ASICs, or as post-synthesis EDIF netlists, for low-volume FPGAs from Actel, Altera, Lattice or Xilinx.

Free versions are the T80 and TV80, available as VHDL and Verilog sources under a BSD style license.[46][47][48] The VHDL version, once synthesized, can be clocked up to 35 MHz on a Xilinx Spartan II FPGA. For large production series, it is much cheaper to use a traditional solution (or ASIC) than an FPGA, however.

Software emulation

Software emulation of the Z80 instruction set on modern PCs runs faster than the original Z80 CPU ran and is used for home computer simulators (such as Amstrad CPC, MSX and Sinclair ZX Spectrum) and also for video game emulators such as MAME, which executes arcade video games. SIMH emulates MITS Altair 8800 computer with Intel 8080, Zilog Z80 or Intel 8086 processors.

Notable uses

Desktop computers

See also: list of home computers by category#Zilog Z80 and clones

During the late 1970s and early 1980s, the Z80 was used in a great number of fairly anonymous business-oriented machines with the CP/M operating system, a combination that dominated the market at the time.[49][50]

Two well-known examples of Z80+CP/M business computers are the portable Osborne 1 and the Kaypro series. Research Machines manufactured the 380Z and 480Z microcomputers which were networked with a thin Ethernet type LAN and CP/NET in 1981. Other manufacturers of such systems included Televideo, Xerox (820 range) and a number of more obscure firms. Some systems used multi-tasking operating system software to share the one processor between several concurrent users.

The Radio Shack TRS-80, introduced in 1977, used the Z80, as did the follow on Models II,III,IV and proposed Model V. In the United Kingdom, Sinclair Research used the Z80 and Z80A in its ZX80, ZX81 and ZX Spectrum home computers, and Amstrad used them in their Amstrad CPC line.

The Commodore 128 featured a Z80 processor alongside its MOS Technology 8502 processor for CP/M compatibility.[51] Other 6502 architecture computers on the market at the time, such as the BBC Micro, Apple II[52] and the 6510 based Commodore 64,[53] could make use of the Z80 with an external unit, a plug-in card, or an expansion cartridge. The Microsoft Z-80 SoftCard for the Apple II was a particularly successful add-on card and one of Microsoft's few hardware products of the era.

Acer, formerly Multitech, introduced the Microprofessor I, in 1981. It was designed as a simple and inexpensive training system for the Z80 microprocessor. Currently, it is still being manufactured and sold by Flite Electronics International Limited in Southampton, England

Embedded systems and consumer electronics

The Zilog Z80 has long been a popular microprocessor in embedded systems and microcontroller cores,[18] where it remains in widespread use today.[10][54] The following list provides examples of such applications of the Z80, including uses in consumer electronics products.

Industry

Consumer electronics

Musical instruments

See also

Footnotes

  1. ^ Anderson 1994, p. 51
  2. ^ Anderson 1994, p. 57
  3. ^ a b Brock, Gerald W. (2003). The second information revolution. Harvard University Press. ISBN 9780674011786. 
  4. ^ "History of the 8-bit: travelling far in a short time". InfoWorld (Palo Alto, CA: Popular Computing Inc.) 4 (47): pp. 58–60. November 29, 1982. ISSN 0199-6649. http://books.google.com/books?id=HjAEAAAAMBAJ&pg=PA58. 
  5. ^ Shima, Masatoshi; Federico Faggin; Ralph Ungermann (August 19, 1976). "Z-80 chip set heralds third microprocessor generation". Electronics (New York) 49 (17): pp. 32–33 McGraw–Hill. 
  6. ^ Mathur. Introduction to Microprocessors. p. 111. ISBN 9780074602225. "The register architecture of the Z80 is more innovative than that of the 8085" 
  7. ^ Ciarcia 1981, pp. 31,32
  8. ^ a b Wai-Kai Chen (2002). The circuits and filters handbook. CRC Press. p. 1943. ISBN 9780849309120. "interrupt processing commences according to the interrupt method stipulated by the IM i, i=0, 1, or 2, instruction. If i=1, for direct method, the PC is loaded with 0038H. If i=0, for vectored method, the interrupting device has the opportunity to place the op-code for one byte . If i=2, for indirect vector method, the interrupting device must then place a byte . The Z80 then uses this byte where one of 128 interrupt vectors can be selected by the byte ." 
  9. ^ Adrian, Andre. "Z80, the 8-bit Number Cruncher". http://www.andreadrian.de/oldcpu/Z80_number_cruncher.html. 
  10. ^ a b c Balch, Mark (2003-06-18). "Digital Fundamentals". Complete Digital Design: A Comprehensive Guide to Digital Electronics and Computer System Architecture. Professional Engineering. New York, New York: McGraw-Hill Professional. p. 122. ISBN 0-07-140927-0. 
  11. ^ The Seybold report on professional computing. Seybold Publications. 1983. "In the 8-bit world, the two most popular microcomputers are the Z80 and 6502 computer chips." 
  12. ^ Popular Computing. McGraw-Hill. 1983. p. 15. 
  13. ^ Markoff, John (18 October 1982). "Zilog's speedy Z80 soups up 8-bit to 16-bit perfofrmance". InfoWorld (InfoWorld Media Group): 1. ISSN 0199-6649. 
  14. ^ Electronic design. Hayden. 1988. p. 142. "In addition to supporting the entire Z80 instruction set, the Z180" 
  15. ^ Ganssle, Jack G. (1992). "The Z80 Lives!". http://www.z80.info/z80lives.htm. "The designers picked an architecture compatible with the Z80, giving Z80 users a completely software compatible upgrade path. The 64180 processor runs every Z80 instruction exactly as a Z80 does" 
  16. ^ Kilobaud. 1001001. 1977. p. 22. 
  17. ^ Zaks, Rodnay (1982). Programming the Z80 (3rd ed.). SYBEX. p. 62. ISBN 9780895880697. 
  18. ^ a b c Steve Heath. (2003). Embedded systems design. Oxford: Newnes. p. 21. ISBN 9780750655460. 
  19. ^ Frank Durda IV. "8080/Z80 Instruction Set". http://nemesis.lonestar.org/computers/tandy/software/apps/m4/qd/opcodes.html. 
  20. ^ Jump (JP) instructions, which load the program counter with a new instruction address, do not themselves access memory. Absolute and relative forms of the jump reflect this by omitting the round brackets from their operands. Register based jump instructions such as "JP (HL)" include round brackets in an apparent deviation from this convention."Z80 Relocating Macro Assembler User's Guide". p. Page B–2. http://z80cpu.eu/mirrors/oldcomputers.dyndns.org/manuals/z80asm.pdf. 
  21. ^ Scanlon, Leo J. (1988). 8086/8088/80286 assembly language‎. Brady Books. p. 12. ISBN 9780132469197. "The 8086 is software-compatible with the 8080 at the assembly-language level." 
  22. ^ Nelson, Ross P. (1988). The 80386 book: assembly language programmer's guide for the 80386‎. Microsoft Press. p. 2. ISBN 9781556151385. "An Intel translator program could convert 8080 assembler programs into 8086 assembler programs" 
  23. ^ a b "Z80 CPU Introduction". Zilog. 1995. http://www.z80.info/z80brief.htm. "It has a language of 252 root instructions and with the reserved 4 bytes as prefixes, accesses an additional 308 instructions." 
  24. ^ . p. 65. ISBN 9781420043020. "The 8-bit microprocessors that preceded the 80x86 family (such as the Intel 8080, the Zilog Z80, and the Motorola) did not include multiplication" 
  25. ^ Froehlich, Robert A. (1984). The free software catalog and directory. Crown Publishers. p. 133. ISBN 9780517554487. "Undocumented Z80 codes allow 8 bit operations with IX and IY registers." 
  26. ^ a b Bot, Jacco J. T.. "Z80 Undocumented Instructions". Home of the Z80 CPU. http://www.z80.info/z80undoc.htm. "If an opcode works with the registers HL, H or L then if that opcode is preceded by #DD (or #FD) it works on IX, IXH or IXL (or IY, IYH, IYL), with some exceptions. The exceptions are instructions like LD H,IXH and LD L,IYH" 
  27. ^ Robin Nixon The Amstrad Notepad Advanced User Guide ,Robin Nixon, 1993 ISBN 1850585156, pages 219-223
  28. ^ Zilog (2005). Z80 Family CPU User Manual. Zilog. p. 11. http://www.zilog.com/docs/z80/um0080.pdf. 
  29. ^ Ciarcia 1981, p. 65
  30. ^ . p. 200. ISBN 9780895880697. "ADD A, n Add accumulator with immediate data n. MEMORY Timing: 2 M cycles; 7 T states" 
  31. ^ Ciarcia 1981, p. 63
  32. ^ Ciarcia 1981, p. 77
  33. ^ Ciarcia 1981, p. 36
  34. ^ Ciarcia 1981, p. 58
  35. ^ Young, Sean (1998). "Z80 Undocumented Features (in software behaviour)". http://z80.info/z80undoc3.txt. "The I/O instructions use the whole of the address bus, not just the lower 8 bits. So in fact, you can have 65536 I/O ports in a Z80 system (the Spectrum uses this). IN r,(C), OUT (C),r and all the I/O block instructions put the whole of BC on the address bus. IN A,(n) and OUT (n),A put A*256+n on the address bus." 
  36. ^ "Overview of the SHARP MZ-series". SharpMZ.org. http://www.sharpmz.org/mzovview.htm. "Most MZ's use the 8bit CPU LH0080 / Z80 [...]" 
  37. ^ Ganssle, Jack G. (1992). "The Z80 Lives!". http://www.z80.info/z80lives.htm. "The 64180 is a Hitachi-supplied Z80 core with numerous on-chip "extras". Zilog's version is the Z180, which is essentially the same part." 
  38. ^ Ganssle, Jack G. (1992). "The Z80 Lives!". http://www.z80.info/z80lives.htm. "Both Toshiba and Zilog sell the 84013 and 84015, which are Z80 cores with conventional Z80 peripherals integrated on-board." 
  39. ^ "EZ80 ACCLAIM Product Family". Zilog. http://www.zilog.com/index.php?option=com_product&Itemid=26&mode=showFamilyDetails&familyId=119&parent_id=77. 
  40. ^ Electronic Business Asia. Cahners Asia Limited. 1997. p. 5. "Kawasaki's KL5C80A12, KL5C80A16 and KL5C8400 are high speed 8-bit MCUs and CPU. Their CPU code, KC80 is compatible with Zilog's Z80 at binary level. KC80 executes instructions about four times faster than Z80 at the same clock rate" 
  41. ^ "Hardware specs". S1mp3.org. 2005. http://www.s1mp3.org/en/docs_hwspecs.php. 
  42. ^ "Section 6 MOS MPU, MCU, and Peripherals Market Trends". p. 16. http://smithsonianchips.si.edu/ice/cd/STATUS97/SEC06.PDF. 
  43. ^ Axelson, Jan (2003). Embedded ethernet and internet complete. Lakeview research. p. 93. ISBN 9781931448000. "Rabbit Semiconductor's Rabbit 3000 microprocessor, which is a much improved and enhanced derivative of ZiLOG, Inc.'s venerable Z80 microprocessor." 
  44. ^ Hyder, Kamal; Perrin, Bob (2004). Embedded systems design using the Rabbit 3000 microprocessor. Newnes. p. 32. ISBN 9780750678728. "The Rabbit parts are based closely on the Zilog Z180 architecture, although they are not binary compatible with the Zilog parts." 
  45. ^ "CZ80CPU - 8-bit Microprocessor Core". Cast. http://www.cast-inc.com/cores/cz80cpu/index.shtml. 
  46. ^ "T80 cpu :: Overview". OpenCores.org. http://www.opencores.org/?do=project&who=t80. 
  47. ^ "TV80 :: Overview". OpenCores.org. http://www.opencores.org/?do=project&who=tv80. 
  48. ^ "TV 80 Home Page". http://ghutchis.googlepages.com/tv80homepage. 
  49. ^ Holtz, Herman (1985). Computer work stations. Chapman and Hall. p. 223. ISBN 9780412004919. "and CP/M continued to dominate the 8-bit world of microcomputers." 
  50. ^ Dvorak, John C. (10 May 1982). "After CP/M, object oriented operating systems may lead the field". InfoWorld (InfoWorld Media Group) (Vol. 4, Num. 18): 20. ISSN 0199-6649. "The idea of a generic operating system is still in its infancy. In many ways it begins with CP/M and the mishmash of early 8080 and Z80 computers." 
  51. ^ Byte. McGraw-Hill. 1986. p. 274. "C-128 CP/M uses both the Z80 and 8502 processors. The Z80 executes most of the CP/M BIOS functions." 
  52. ^ Petersen, Marty (6 February 1984). "Review: Premium Softcard IIe". InfoWorld (InfoWorld Media Group) (Vol. 6, Num. 6): 64. "Several manufacturers, however, make Z80 coprocessor boards that plug into the Apple II." 
  53. ^ Popular Computing. McGraw-Hill. 1986. p. 22. "The Commodore 64 CP/M package contains a plug-in cartridge with a Z80 microprocessor and the CP/M operating system on a disk." 
  54. ^ Ian R. Sinclair. (2000). Practical electronics handbook. Oxford, Angleterre: Newnes. p. 204. ISBN 9780750645850. 
  55. ^ A. Meystel. (1991). Autonomous mobile robots : vehicles with cognitive control. Teaneck, N.J.: World Scientific. p. 44. ISBN 9789971500894. 
  56. ^ American Society of Cinematographers (1983). American cinematographer. ASC Holding. p. 18. 
  57. ^ Bruce A. Artwick. (1980). Microcomputer interfacing.. Englewood Cliffs, N.J.: Prentice-Hall: Prentice-Hall. p. 25. ISBN 9780135809020. 
  58. ^ Anderson, Nate. "Source code requests force breathalyzer maker to sober up". Ars Technica. http://arstechnica.com/old/content/2008/09/source-code-requests-force-breathalyzer-maker-to-sober-up.ars. "The Intoxilyzer 5000EN, a breathalyzer, runs on a pair of Z80 processors" 
  59. ^ Campbell, Robert (2001). "TI-82/83/85/86 Mathematics Use". UMBC. http://www.math.umbc.edu/~campbell/Calculators/TI8x/. 
  60. ^ Miesenberger, Klaus (2008). Computers Helping People with Special Needs. Berlin: Springer. p. 556. ISBN 9783540705390. 
  61. ^ "Game Board Schematic" (pdf). Midway Pac-Man Parts and Operating Manual. Chicago, Illinois: Midway Games. December 1980. pp. 32, 35. http://www.arcadedocs.com/vidmanuals/P/Pac-Man.pdf. Retrieved 2009-07-20. 
  62. ^ Nitsche, Michael (2009-03-31). "Games and Rules". Video Game Spaces: Image, Play, and Structure in 3D Worlds. Cambridge, Massachusetts: MIT Press. p. 26. ISBN 0-262-14101-9. "they would not realize the fundamental logical difference between a version of Pac-Man (Iwatani 1980) running on the original Z80" 
  63. ^ "Game Logic Schematic" (pdf). Midway Galaxian Parts and Operating Manual. Chicago, Illinois: Midway Games. February 1980. pp. 22, 24. http://www.arcadedocs.com/vidmanuals/G/Galaxian.pdf. Retrieved 2009-07-20. 
  64. ^ "Schematics and Wiring Diagrams" (pdf). Midway Galega Parts and Operating Manual. Chicago, Illinois: Midway Games. October 1981. pp. 7–7 – 7–9, 7–14. http://www.arcadedocs.com/vidmanuals/G/Galaga.pdf. Retrieved 2009-07-20. 
  65. ^ InfoWorld (Vol. 4, No. 50): 33. 20 December 1982. ISSN 0199-6649. "The ColecoVision uses the Z80 microprocessor" 
  66. ^ Daniel Sanchez-Crespo Dalmau. (2004). Core techniques and algorithms in game programming. Indianapolis, Ind.: New Riders. p. 14. ISBN 9780131020092. "Internally, both the NES and Master System were equipped with 8-bit processors (a 6502 and a Zilog Z80, respectively)" 
  67. ^ Joe Grand, Albert Yarusso. (2004). Game console hacking : Xbox, PlayStation, Nintendo, Game Boy, Atari, & Sega. Rockland, Mass.: Syngress. p. 182. ISBN 9781931836319. "This first Game Boy operated on four AA batteries and was equipped with a Zilog Z80 microprocessor — the same processor used on many electronic devices in the 1980s. In fact, all the Game Boy models up to and including the Game Boy Color featured a Z80 CPU" 
  68. ^ Reid, Gordon (1999). "The Prophet 5 and Prophet 10". "Although the Prophet 5s and Prophet 10s incorporated Z80 microprocessors," 
  69. ^ "About MemoryMoog". Moog MemoryMoog User Group. http://www.interlogic.jpn.org/memorymoog/spec.html. "CPU is Z80 + Z80CTC" 

References

Further reading

External links

Z80 series
Z80 · Z180 · Z280 · Z380 · Z800 · eZ80
Z8000 series
Microcontroller
Z80 compatibles
ASCII R800 · NEC µPD780C · Sharp LH0080 · T34VM1 · U880 · MMN80CPU
8-bit microcontroller families
AVR · PIC · COP8 · MCS-48 · MCS-51 · Z8 · eZ80 · HC08 · HC11 · H8 · PSoC